UPVC Window Repairs
Your windows are important to both appearance and energy efficiency of your home. But, they can also be damaged or even broken.
Window repairs are usually less expensive than replacing the entire window. Broken handles, damaged mechanisms or hinges and even broken locks can be fixed avoiding the need to replace your windows.
1. Broken Glass
Cracked windows can let cold air in and cause drafts. Additionally, cracks can create safety issues, especially when you have children. Luckily, it's easy to fix broken glass windows.
Whether you're dealing with a crack caused by an earthquake, or a window that was hit by a flying ball the most important thing is to repair it as soon as possible before it gets any worse. If the crack extends across more than one pane of glass or is large enough that you could put your hand into it without putting yourself at risk of bending or breaking, then you may need to replace the entire window.
To safeguard yourself from broken pieces, put on thick gloves and safety glasses. Then apply tape over any cracks or areas where it has broken to keep the glass in place. Once the tape is secured and the glass is firmly in place, gently tap the glass to loosen it up and remove any large chunks. Place the glass in a safe container for disposal.
Then, lay the sash on a flat surface and remove the beading from the frame. This allows you to work with the glass. With a utility knife or deglazing tool, remove any sealant around the break. After the old glass has been removed and the rabbet is clean, you can scrub it to remove any traces of sealant and prepare the new glass.
While working on the window, it's a good idea to have a sheet of paper nearby to note down the measurements you'll need to make a replacement glass. This will ensure that you don't commit any mistakes when you order replacement glass.
It is essential to use a the highest-quality silicone sealant when replacing the glass. This will prevent the water from entering your home. It's also a good idea to use a polyurethane caulk on the edge of the sash as it will add an extra layer of waterproofing. You should also ensure that the glass you are installing is tempered rather than annealed to add an additional layer of security.
2. Cracked Frames
uPVC (un-plasticized Polyvinyl Chloride) is an extremely popular choice for double-glazed window frames because it is strong and easy to maintain. Windows made of this material can be damaged and require repair services.
One of the most common problems is cracking of the frame, which can occur for many reasons. For instance cracks could be caused by hitting the window with a sharp object, such as ladders or a garden tool. The frame could then begin to break apart or even detach from the wall. The cracks could also develop due to natural causes like expanding and shrinking of uPVC over time.
Another issue is leaking from the window. It can be caused by a variety of factors like nail fins breaking, or loosening, allowing air into the home. This is a serious issue that should be addressed immediately to stop water from entering your home.
Additionally, if the hinges of a window are not aligned properly or damaged, this can cause leaks and draughts. These hinges are responsible to squeeze the sash and seal in order to close the window tightly.
Fogging of glass is a different issue that is common. This can be caused when the seal between the two glass panes is broken enough to allow air in, causing condensation. Re-sealing the window can fix this problem.
There are several methods to avoid these kinds of repairs, such as doing regular maintenance and cleaning your windows regularly with soapy water. For the best results and the most reliable repair, select a reputable company that is specialized in uPVC. They'll have the equipment and know-how to fix your windows quickly and efficiently.
Ideally, you should be careful not to slam your windows against the wall since this can cause damage to the frames and also cause them to lose their insulating properties. Avoid upvc window repair as this could cause uPVC to warp or break.
3. Incorrect Locks or Hinges
Over time, upvc window frames may become stiff and locks may not work properly. This can be quite annoying and leave your home feeling less secure. There are a number of ways to fix this problem without having to buy a new window unit. Window repairs are typically more cost-effective than purchasing the entire window, saving you a little money. Cloudy2Clear's expert upvc repair team can repair your window handles and hinges so they work again.
UPVC windows are the most popular option for home renovation projects due to their durability and energy efficiency. Like all things that are made of plastic, UPVC windows will degrade over time. They require regular maintenance in order to get the best results. However, fixing your UPVC windows or doors is a simple task which can save you money in the end.
Here are a few suggestions to help you fix your UPVC windows that won't lock:
Verify the seals and locking gearbox. If windows are still unable to lock, you may need to adjust the frame or the sash. To do this, loosen four screws that hold a metal strip to the frame of the left-side window. Each screw should be loosen by a full turn. Be careful not loosen the screws holding the hinges. These are designed to allow for the window to be opened and closed and shouldn't be tampered with.
Then you will need to move the sash towards the left or right to find the location that is most comfortable for you. It is possible to use shims to ensure the best fit. Once you've found the ideal place then tighten the screws and put the caps back on.
A functional UPVC window is crucial for your comfort as well as security. If you're experiencing issues with your window, don't hesitate contact the experts at Window Geeks today. They offer free quotes with no call-out costs, and a 2-year guarantee on all their work. For more details, visit their website or give them a call! They service Widnes Runcorn St Helens and Warrington.
4. Damaged Seals
uPVC Windows are built to last. They are able to withstand tough conditions, but they still have their flaws. Condensation within the glass panes is one the most frequent issues you may encounter with uPVC Windows. This could be a result of a leaky seal on the window, or due to the excessive moisture that is present in the home.
In order to prevent condensation from forming on your uPVC windows, first make sure that you're not using any colored cloths around them since this could cause dye staining or cleaning products that contain harsh chemicals since they can cause damage to your uPVC window frame. Use a white, soft cloth that has been soaked in water to clean your windows. If you're concerned about stains or dirt building over the frames of your windows it's worth buying a solvent PVC cleaning solution, which can be found at a variety of hardware stores. This will help to clean your windows and safeguard them from future damage.
Another common issue that you might encounter in uPVC window seals is that they could be damaged in time, which is why it's crucial to replace them as necessary. This is an easy job that doesn't require the assistance of a professional. Firstly, you'll need to take off the old seal from your window by pinching it and pulling it off. If the seal is stuck on quite tightly then you could try using a knife used by builders to scream a small portion of it off until it is able to be pulled away from the window frame.
After you have removed the seal, you can put it back in. Make sure that it's properly inserted into the grooves on the uPVC frame. Repeat this process for each side of the window until the rubber seal has been fully fit into the grooves. After you've completed this step, you can check for gaps in the corners of the frame. If there are any you'll need to apply more silicone sealant and ensure that the window is completely sealed.